Ultimate 2" and 3" Sanding Kit PLUS

Ultimate 2" and 3" Sanding Kit PLUS

Regular price
Sale price
Unit price

THE Ultimate Sanding Kit-PLUS comes with eight pads in each size instead of five in the regular Ultimate Sanding Kit: Three additional 2" and three additional 3" Roloc Sanding Pad Holders and intermittent pads. 

  • (8) 3" Roloc Sanding Pad Holders

  • (8) 2" Roloc Sanding Pad Holders

  • (8) 3" Intermittent Velcro Pad

  • (8) 2" Intermittent Velcro Pad

  • (5) 3" Velcro Repair Discs

  • (5) 2" Velcro Repair Discs

  • (1) 3" Roloc Mandrel with Stem

  • (1) 2" Roloc Mandrel with Stem

44 pieces in all. If you're buying the Super Sanding Kit and an Ultimate Sanding Kit you might want to consider getting the PLUS Kit. 


The Ultimate Sanding System Best Practices

Has this ever happened to you? When sanding a bowl on the lathe you stick a sanding disc on your hook and loop holder and before you know it the thing goes flying off in the wood chips or gets sucked into your vac system. You put it on again if you can find it and the darn if it doesn't go flying again. You come to the sad realization that the Velcro hook part on the $9.00 to $21.00 holder has worn down to the point where it won’t hold any longer. We now have the perfect solution to that problem with our versatile Roloc system. You don’t rip sanding discs on and off the same holder any longer. Instead you twist on/off a new holder on the same holder stem. You keep the same sandpaper on the holder until it is no longer any good. That way you don’t wear out the holder or the paper for a long, long time. When you do, we supplied replacement hook Velcro with an industrial adhesive back to fix it.

We also give you a 10mm thick intermediate pad for extra softness for those tight curves in small bowls (see photos). You can also use a 3-inch holder on a 2-inch stem for extra flex. Lastly, if you need to do some hand sanding, these holders are easy to grab and will get into tight spaces. With just a twist of the wrist you have a compact hand sander with all the grits you need. We suggest using a Sharpie marker to write the grit on the side of a holder as shown in the picture. Just line them up and go to sanding. See the photo of them mounted to peg board attached to my lathe. They screw right in. It's easy to see and grab the one you need.  

When you are done with one grit, just pop off the holder and screw on the next grit. It's that easy. This way you change the pad holder on the ROLOC  STEM INSTEAD OF RIPPING THE SANDING DISC ON AND OFF THE HOLDER AND WEARING OUT THE VELCRO. Join the many turners who have come to realize this is a great sanding system. What's more - you are really getting 10 sanding pad holders for the price of 3 decent ones anywhere else. Not only that but intermittent pads sell for about $4.00 each anywhere else - here you are getting 10 of those as well. These items sold separately would easily sell for close to $200 elsewhere. This deal is a no-brainer.  

Questions?  Call Ken 7 days a week up to 10 pm  EST

 phone 678-442-9454  Always glad to help!